How to change M3-ATX EEPROM settings using the M3-ATX serial cable. 

NOTE: This cable is not intended for end users, 
it is designed for OEM and system integrators. 
For help, please send to support@cartft.com


1) Shut down your PC, remove power from M3-ATX
2) Connect serial cable, one end goes into the M3-ATX, 
the other end goes into the motherboard's internal COM connector
(please refer to the motherboard's manual for connector location). 
3) Apply power to the PC, startup PC. 
4) Using Windows XP or Windows Vista, launch the M3-ATX-SRL.exe programm.
5)Select desired attributes (ex. Offdelay, Hardoff) from the drop down list.
6) Change desired setting. 
7) Shut down PC. 
8) Remove power from M3-ATX, disconnect the serial cable and select your desiderd jumper setting. 

To reset to factory defaults, please refer to the M3-ATX, see 'resetting to factory defaults'

IMPORTANT: The package also contains two batch files as example:
a.)M3AtxTesterAuto.bat - example to start the M3Atx Software with serial port autoscan higher than COM10
b.)M3AtxTesterDefPort.bat - example to start the M3Atx Software with a predefined serial port